CANINE T&S IgE TEST KIT (T+74S)

CANINE T&S IgE TEST KIT (T+74S)

범주:

설명

CANINE T&S IgE TEST KIT (T+74S)

The world’s first-74 dog allergen testing for international pet hospitals and home use, no equipment, welcome to consult

Allergen products advantages:
1. Just 150 ul of serum or plasma.
2.The entire detection process in less than 50 분
3. One performance test 74 dog allergen items
4. Simple operation, no need for professional and technical personnel and equipment
5. The product is suitable for laboratory, pet hospital or home operation

 

DESIGN AND PRINCIPLE
For one sample testing, one Solid Array Unit, one Solution Unit and one Substrate should be used together. The Solid Array Unit, which contains immobilized location markers, anti-canine IgE antibody, and allergenic substances on a membrane and a protective cap, is packaged in one aluminum foil bag with a desiccant. The Solution Unit contains all the necessary reagents for forming enzyme linked complex of antibody-antigen reaction that are deposited separately in the different compartments of a plastic cartridge and sealed with a protective aluminum foil. The Substrate is deposited in a small substrate bottle.Briefly, pull open the Solution Unit and deposit the serum sample in the compartment 1 of the Solution Unit and mix well. After tearing
aluminum foil bag, take the Solid Array Unit out and pull off the protective cap. Immobilized location markers, anti-canine IgE antibody, and allergenic substances can be observed as pink spot array on the membrane in the window of the Solid Array Unit. Then insert the Solid Array Unit into the compartment 1 and have it absorb the solution in
the compartment 1 for a few minutes. After the absorption, the pink dye will disappear from the membrane in the window, which indicates successful specific antibody-antigen reaction finished. Then the Solid Array Unit will be transferred to the remaining compartments at timed intervals step by step. The bound canine IgE antibodies on the spot array
will be labeled with enzyme in the compartment 3, which contains anti-canine IgE- enzyme conjugate. For a satisfactory result, wash steps are introduced. In the compartment
2, the unbound canine IgE antibodies and other substances in the serum sample will be removed. In compartment 4 그리고 5, the unbound or excess enzyme conjugate will be adequately removed.
At the end, pipette substrate in the substrate bottle, and slowly drop the substrate on the membrane at the window center to develop purple-blue spots if there were enzyme bound there.
To confirm the validation of the performance, purple-blue color of the location markers on the membrane should be visible above a certain level after finishing a successful testing process.
The location markers will be always visible on the membrane in the window of the Solid Array Unit after successful testing.By putting the transparent Locator on the window of the Solid Array Unit in correct position, the Total IgE and Specific IgE spots can be located. By comparing the visible spots with the Color Scale provided, the signal strength can be obtained and the levels representing the clinical interpretation can be recorded by hand in the Result Card provided according to the INTERPRETING TEST RESULTS.

 






    장바구니에 추가되었습니다:
    점검